ECM
Custom CAN ID ECM
The progauges products offer fully customizable electronic control modules equipped with software-configurable I/Os and dual CAN interfaces for programmable CAN IDs, message mapping, and dynamic input and output configuration tailored for modern software-defined vehicle architecture. Rated for 9 to 36V DC systems, progauges products come with dual CAN 2.0B interfaces with CAN FD compatibility ranging from 125 kbps to 1 Mbps, operating efficiently from -40°C to +85°C or even to +105°C. Housed in a sealed, vibration-resistant enclosure, they comply fully with SAE J1939, ISO 11898, CISPR 25 EMC, and ISO 16750 standards. They are ideally suited for trucks, buses, and heavy equipment across internal combustion engines, EV vehicles, and hydrogen platforms, while integrating smoothly with the EV wiring harnesses and the E Mobility fuse boxes. Available for OEM, ODM, and aftermarket firmware and I/O customization.
KT757 Electronic Control Module (ECM)
Technical Specifications
|
Design Type |
Fully customizable (OEM / ODM) |
|
I/O Count |
Per configuration (software-defined) |
|
I/O Type |
Software-configurable (analog / digital input, high-side / low-side output) |
|
Rated Voltage |
9–36V DC |
|
Current Draw |
Standby < 150 mA, up to 8A |
|
CAN Interface |
2× CAN 2.0B (programmable ID, CAN FD-compatible, 125 kbps–1 Mbps) |
|
Operating Temperature |
-40°C to +85°C / +105°C |
|
Housing |
Rugged sealed housing |
|
Features |
Programmable CAN ID, reflashable firmware, advanced diagnostic LED |
|
Compliance |
SAE J1939, ISO 11898, CISPR 25 (EMC), ISO 16750 (vibration) |
|
Customization |
OEM / ODM; all parameters adjustable per customer requirements, final design confirmation, and application testing |
Product Description
Overview
The KT757 is a fully customizable (OEM / ODM) electronic control module (ECM) with software-configurable I/O and dual CAN interfaces, designed for high-I/O control tasks with dedicated logic, message mapping, and dynamic input / output configuration. I/O count is per configuration (software-defined), rated voltage 9–36V DC, standby current < 150 mA and up to 8A, CAN interface 2× CAN 2.0B (programmable ID, CAN FD-compatible, 125 kbps–1 Mbps), operating temperature -40°C to +85°C / +105°C, in a rugged sealed housing with an advanced diagnostic LED and reflashable firmware, compliant with SAE J1939, ISO 11898, CISPR 25 (EMC), and ISO 16750 (vibration). It integrates with EV harness systems and E-Mobility fuse boxes and is customizable for CAN ID and I/O configuration.
Key Features
- High-I/O software-configurable ways
- Programmable CAN ID and message mapping
- Dual CAN 2.0B (CAN FD-compatible) communication
- 9–36V DC wide voltage, rugged sealed vibration-resistant housing
- Reflashable firmware and advanced diagnostic LED
- OEM / ODM and aftermarket; EV harness compatible
Markets & Applications
For complex control, sensor fusion, and EV transition in high-I/O control applications. Available for OEM / ODM and aftermarket.